|
Packmark Australia Small enough to care - Large enough to deliver
|
||||
|
|
Within this section you will find information that will hopefully help you manage your Pad Printing and Hot Stamping business more effectively. In addition to static information it is our intention to keep our customers up to date with the latest information from our suppliers. Subjects covered to date are:- Plastics Identification I hope this will be of assistance to you. Should you wish to help us by adding your comments please do so by sending us an e-mail As we all know Pad Printing is genearlly about printing onto plastics
and to a lesser extent so can Hot Stamping. But what plastic is it?
If we don't know what the plastic is how can we select an ink or a foil.
From our experience plastics identification is an on going problem Use a series of tests to determine
what the plastic is. We have provided a simple set of tests which
should help. Go here Workplace Health and Safety legislation becomes more difficult to manage as time goes by so in an effort to help keep up with our obligations we have made available within this section and in PDF format Marabu Material Safety Data Sheets for the chemical products we sell. Go here Now that we have hopefully identified the type of plastic we need to print we need to select an ink system. Follow this link to the Marabu Ink page where you will find extensive information about Marabu Inks Curing time versus Drying time There is a difference between physical drying and chemical drying/curing which can effect the way in which a pad printed article should be handled after printing. For more informatin Go here |
|||